Description
The VSH-A600R is a high flow, variable-speed pump driven by a powerful, brushless DC motor rated for continuous-duty. Equipped with a remote start/stop feature, the pump can be activated by any dry contact signal, such as those from a flow or manual switch, running continuously during switch closure and stopping when open. Please see our complete line of Pump Systems for alternative models.
Designed to operate with our Ultra Class Tubing, this unit is ideal for pumping high volumes and viscous or abrasive fluids. The unit ships installed with a 3/8" bore Ultra Norprene® drive tube.
Features and Benefits
- Wide flow range with a 25:1 turndown ratio
- Pump head can be set in four different tube positions (up, down, left, right)
- Accepts continuous lengths of tubing for clean fluid paths
- Lower ongoing operating costs (ANKO Ultra tubing rolls vs expensive, individual drive tubes)
- Reversible motor for bi-directional operation
- Brushless DC motor for long life and maintenance-free use
- Separate power switch to maintain speed setting when powering unit on/off
- Can be paired with our Remote Dry Contact Switches (sold separately) for manual activation in dosing and dispensing applications.
- Flexible internal power supply rating of 100-240VAC 50/60Hz
- Viscosity rating of 3000 centipoise
- Chemical resistant polymer housing
- Up to 25 psi working pressure
- UL Listed
- 3-Year Warranty
- Made in USA
INCLUDES: Drive unit, A603 pump head, 3/8" bore Norprene® drive tube, and 6-ft. (1.8m) NEMA 5-15P power cord. Typically ships within 5 to 7 business days.
California Proposition 65 Warning
Flow Rates
| Flow Rates by RPM Class and Tube Bore (mL/min) | ||||
|---|---|---|---|---|
| RPM Class | Speed Setting | 3/8" | ||
| GPD | OZ/min | mL/min | ||
| 300 | Max | 1796 | 160 | 4721 |
| Min | 72 | 6.0 | 189 | |
| 150 | Max | 847 | 75 | 2227 |
| Min | 28 | 2.5 | 74 | |
|
Notes to Flow Chart: Flow rates are for guidance purposes only and are based upon pumping ambient temperature (22°C/72°F) water at zero pressure and zero lift. Rates may increase/decrease based upon numerous factors including: motor variances, tubing characteristics, fluid viscosity, lift height, pressure and number of rollers. Anko reserves the right to make changes at any time without prior notice. The information provided is not intended for a specific application purpose. |
Specifications
| SPECIFICATIONS | |
| Model Series | VSH-A600 |
| Pump Head | A603 |
| Tubing Class | Ultra-Duty |
| Control Type | Variable Speed - Analog |
| Speed Control | +/-2.0% |
| Turndown Ratio | 25:1 |
| Directional Control | Bi-Directional |
| Motor Type | Brushless DC |
| Duty Cycle | Continuous |
| Voltage | 100-240 50/60Hz |
| Plug End Type | NEMA 5-15P |
| Max Working Pressure | 25 psi |
| Compliance | UL778; FCC Part 15b Class A |
| MATERIALS OF CONSTRUCTION | |
| Enclosure | Polypropylene RTP 155 |
| Pump Head | Polycarbonate |
| Rollers | MoS2 Filled Nylon |
| Rotor | Polycarbonate |
| DIMENSIONS |
 |
| STEP File |
LITERATURE
